|
 |
| |
|
|
|
|
|
| |
--- Misc parts --- |
|
| |
|
|
| |
|
Zeiss
Achromat
|
High quality "Carl Zeiss"doublet cemented achromat with anti-reflective lens coating. This achromat lens is used in my legendary HV20ACHR1 unit!
Achromat diameter = 33mm
I got this many requests to offer it without the rings for do it yourself people that are on a budget.
So here it is! Now you can implement it in your own design.
The achromats are very rare and taken out from used
high end laboratory equipment (class A). Therefore they might have some microscratches on their coatings but this does not affect the image quality. |
EUR 55,-
(ca
. USD 72,-) |
|
| |
|
|
|
|
|
| |
|
PCX |
High quality planoconvex lens with anti-reflective lens coating.
Very good as condenser lens for medium format 70mm DOF adapters. |
EUR 20,-
(ca . USD 25,-) |
|
| |
|
|
|
|
|
| |
|
DCX |
High quality biconvex lens.
Very good as condenser lens for medium format 70mm DOF adapters.
This lens was sandwiched with the biconcave lens. |
EUR 20,-
(ca . USD 25,-) |
|
| |
|
|
|
|
|
| |
|
BCV |
High quality biconcave lens.
This lens was sandwiched with the biconvex lens above. |
EUR 20,-
(ca . USD 25,-) |
|
| |
|
|
|
|
|
| |
|
SWITCH |
Simple switch for your DIY DoF adapter. |
EUR 2,-
(ca. USD 2,50) |
|
| |
|
|
|
|
|
| |
|
MR-20 |
20 Ohm Micro Rheostat for your DIY DoF adapter.
>>>Heres how to implement the microrheostat to get adjustable vibration<<<
The microrheostat is a multiturn part! That means that you can turn the adjusting pin approx. 20 times in each direction until it reaches its maximum or minimum value. If you turn the adjusting pin only 360° you wont see any effects.
(On request I have also a 50 Ohm Micro Rheostat if you need a higher value.) |
EUR 5,-
(ca. USD 6,-) |
|
| |
|
12-BMM |
Black Mamba vibrating pancake motor!
These new motors have a greater vibration at the same voltage level than the other vibe motors on the market.
It's black color avoids internal reflections in your dof adapter. It also comes with a premounted sticky-tape strip on the backside.
This makes it really simple to attach it to the vibrating gg-holders.
All vibrating GG-Holders needs a 12mm pancake vibrating motor (except the VH-57X Ver. 2.0).
If you want the standard motor you can still buy it from:
www.hobbyengineering.com (vibrating motor - Item: 3425) USA
www.solarbotics.com (vibrating motor - Item: VPM2) USA
www.pmdri.com (vibrating motor - Item: 312-101) UK
|
EUR 10,-
(ca. USD 13,-) |
|
| |
|
|
|
|
|
| |
|
TUBES |
Cheap macro extension tubes for Nikon, Canon, Minolta...
Order here (its a german homepage):
www.enjoyyourcamera.com (Search for "Makro Zwischenringe")
or get them from ebay.
|
|
|
| |
|
|
|
|
|
| |
|
SU55-60
Canon
|
Step-Up ring from 55mm to 60mm for the cheap Canon EOS / EF extension tubes from ebay! Compatible only with the Canon EOS extension tubes. No more gluing necessary! Just screw it on the back of your Canon EOS tube to get standard 55mm threading!
High quality aluminium black anodized! |
EUR 30,-
(ca. USD 38,-) |
|
| |
|
|
|
|
|
| |
|
SU55-60
Pentax
|
Step-Up ring from 55mm to 60mm for the cheap Pentax extension tubes from ebay!
Compatible only with the Pentax extension tubes. No more gluing necessary!
Just screw it on the back of your Pentax tube to get standard 55mm threading!
High quality aluminium black anodized! |
EUR 30,-
(ca. USD 38,-) |
|
| |
|
|
|
|
|
| |
|
SU55-57
Nikon
|
Step-Up ring from 55mm to 57mm for the cheap Nikon F / Ai extension tubes from ebay! Compatible only with the Nikon F / Ai extension tubes. No more gluing necessary! Just screw it on the back of your Nikon F / Ai tube to get standard 55mm threading! High quality aluminium black anodized! |
EUR 30,-
(ca. USD 38,-) |
|
| |
|
|
|
|
|
| |
|
SU55-57
Minolta
|
Step-Up ring from 55mm to 57mm for the cheap Minolta MD extension tubes from ebay! Compatible only with the Minolta MD extension tubes. No more gluing necessary! Just screw it on the back of your Minolta MD tube to get standard 55mm threading! High quality aluminium black anodized! |
EUR 30,-
(ca. USD 38,-) |
|
| |
|
|
|
|
|
| |
|
i-Wiz
Ver. 2.0 |
i-Wiz Ver. 2.0 "Power Pod Rail Support"
(compatible with different extension tubes Canon EOS, Nikon, Minolta...)
The professional "Power Pod Rail Support" includes a 50 Ohm Micro-Rheostat, Switch and a battery holder for Micro AAA. All parts are already soldered. Just plug-in your dof adapter.
On request I can also cnc a logo of your choice on the front cover! |
EUR 85,-
(ca. USD 106,-) |
|
| |
|
|
|
|
|
| |
|
HV20
block |
Height adjustable rail support block especially for the Canon HV20
(should also be compatible with other small cameras). |
EUR 55,-
(ca. USD 69,-) |
|
| |
|
|
|
|
|
| |
|
HV20
ACHR1 |
HV20ACHR1 - High Quality Carl Zeiss Achromat unit
especially for Canon HV20/HV30/HV40
(It is also compatible with other small cameras that have a 43mm filter thread).
What extension tubes do you have? Please select a compatible step-up ring for free: (SU55-60 Canon, SU55-60 Pentax, SU55-57 Nikon, or SU55-57 Minolta)
For this Achromat you will need 2x extension tubes to get a distortion free image
and edge to edge sharpness
- click on below link for more infos:
HV20ACHR1_HOW_TO |
EUR 95,-
(ca. USD 129,-)
|
|
| |
|
|
|
|
|
| |
|
L4673-2 |
|
EUR 25,-
(ca. USD 32,-) |
|
| |
|
|
|
|
|
|
 |
|
